Lens Tools – Page 4 – Dynamic Labs
Need help? Call us today:
631-231-7474
0
0
Shop categories
0

Lens Tools

Filter
Sort by
Heat Shield
Heat Shield
$31.95
Heat Shield
$31.95
Prevents oxidation and is odorless and non-toxic. Washes off with water.
Solder Paste with Flux - Silver - Easy
Solder Paste with Flux - Silver - Easy
$50.95
Solder Paste with Flux - Silver - Easy
$50.95
Will adhere wherever applied with bright, clean results and leave little or no carbon residue. Easy to clean up with no waste.
Silver Solder Wire with Cadmium
Silver Solder Wire with Cadmium
$96.95
Silver Solder Wire with Cadmium
$96.95
Melts at 1325º Farenheit.
Third Hand Solder Stand
Third Hand Solder Stand
$36.50
Third Hand Solder Stand
$36.50
Weighted base and clips hold frames just where you want them.
Soldering Station
Soldering Station
$48.50
Soldering Station
$48.50
Multi-position clamps allow for almost any configuration. Heat resistant base protects table during soldering.
Hand Drill
Hand Drill
$19.95
Hand Drill
$19.95
Handy for close drilling of small work at the bench. Just press down to operate.
Spring Hinge Tool Kit - Replacement pin 1.1mm
Spring Hinge Tool Kit - Replacement pin 1.1mm
$9.85
Spring Hinge Tool Kit - Replacement pin 1.1mm
$9.85
[video width="960" height="540" mp4="https://dynamiclabs.net/wp-content/uploads/2018/09/toolrepair.mp4"][/video]
Brass & Nylon Mallet
Brass & Nylon Mallet
$6.05
Brass & Nylon Mallet
$6.05
Non-marring nylon or soft brass for a gentler solution to jobs requiring force.
Custom Die Stamp For Plier
Custom Die Stamp For Plier
$119.95
Custom Die Stamp For Plier
$119.95
For stamping lenses. Please specify for either pliers or staking unit. 6-8 week delivery 1 Plier
Custom Die Stamp With Plier
Custom Die Stamp With Plier
$219.95
Custom Die Stamp With Plier
$219.95
For stamping lenses. Please specify for either pliers or staking unit. 6-8 week delivery 1 Plier
Nylon Anvil
Nylon Anvil
$18.50
Nylon Anvil
$18.50
For use as a backing while peening rivets1 anvil
Steel Anvil
Steel Anvil
$23.50
Steel Anvil
$23.50
For use as a backing while peening rivets1 anvil
Single Pin Punch
Single Pin Punch
$12.50
Single Pin Punch
$12.50
1 set
Pointed Punch
Pointed Punch
$12.50
Pointed Punch
$12.50
1 set
Base Wing Screw
Base Wing Screw
$7.65
Base Wing Screw
$7.65
1 set
Aluminum Tool Holder
Aluminum Tool Holder
Sold Out
Aluminum Tool Holder
Sold Out
Aluminum Tool HolderProfessional looking tool holder for your public work space.
Temple Snipper
Temple Snipper Temple Snipper
$42.50
Temple Snipper
$42.50
Great for use on titanium or stainless temples. 1 unit
Bridge Adjusting Pliers
Bridge Adjusting Pliers
$42.50
Bridge Adjusting Pliers
$42.50
Easily reduces the bridge of a metal frame for the perfect fit. Great for small PD’s. 1 unit
Nosepad Adjusting Kit
Nosepad Adjusting Kit
$108.95
Nosepad Adjusting Kit
$108.95
Ergonomic Standard Side Cutter
Ergonomic Standard Side Cutter
$45.50
Ergonomic Standard Side Cutter
$45.50
This tool has specially designed jaws that allow it to cut screws very close and still retain its super sharp edge. These pliers have a...
Flat-Round Jaw Wire Bending Pliers
Flat-Round Jaw Wire Bending Pliers
$42.50
Flat-Round Jaw Wire Bending Pliers
$42.50
Use for tight curves in nosepad arms or end piece mountings. Make sharp 90º bends or graceful looping curves. 1 unit
Plastic Frame Bracing Pliers
Plastic Frame Bracing Pliers
$42.50
Plastic Frame Bracing Pliers
$42.50
Fiber jaw for a non-marring sure grip. Used for bracing, holding and setting rivet shields. 1 unit
Ergonomic Numont Pliers
Ergonomic Numont Pliers
$45.50
Ergonomic Numont Pliers
$45.50
These pliers have a more ergonomic handle than the classic version. Used to brace and adjust rimless and semi-rimless temples and eyewires. A must have...
Plastic Frame Bracing Pliers - Replacement Jaws
Plastic Frame Bracing Pliers - Replacement Jaws
$9.95
Plastic Frame Bracing Pliers - Replacement Jaws
$9.95
Replacement jaw with screws for Plastic Frame Bracing Pliers (#6110044). 1 unit
Slim Double Nylon Bracing Ergonomic Pliers
Slim Double Nylon Bracing Ergonomic Pliers
$45.50
Slim Double Nylon Bracing Ergonomic Pliers
$45.50
Same classic double nylon bracing pliers, but with a more ergonomic handle. Use these non-marring slender tipped pliers for bracing, bending and holding where clearance...
Deluxe Axis Adjusting Pliers - Replacement Pads
Deluxe Axis Adjusting Pliers - Replacement Pads
$9.95
Deluxe Axis Adjusting Pliers - Replacement Pads
$9.95
Replacment pads for Deluxe Axis Adjusting Pliers (#6120068). 1 unit
Mini Curve Forming Pliers - Replacement Jaws
Mini Curve Forming Pliers - Replacement Jaws
$9.95
Mini Curve Forming Pliers - Replacement Jaws
$9.95
Replacement jaw with screws for Mini Curve Forming Pliers (#6110072). 1 unit
Grooved Double Nylon Pliers - Replacement Jaws
Grooved Double Nylon Pliers - Replacement Jaws
$9.95
Grooved Double Nylon Pliers - Replacement Jaws
$9.95
Replacement jaw with screws for Grooved Double Nylon Pliers(#6110071). 1 unit
Parallel Jaw Flat / Round Pliers
Parallel Jaw Flat / Round Pliers
$54.50
Parallel Jaw Flat / Round Pliers
$54.50
1 unit
Parallel Jaw Flat/Round Pliers - Repl. Jaw
Parallel Jaw Flat/Round Pliers - Repl. Jaw
$9.95
Parallel Jaw Flat/Round Pliers - Repl. Jaw
$9.95
Replacement Jaw for Parallel Jaw Flat/Round Pliers (#6160004). 1 unit
Parallel Jaw Round Nose Pliers
Parallel Jaw Round Nose Pliers
$54.50
Parallel Jaw Round Nose Pliers
$54.50
1 unit
Parallel Jaw Side Cutters
Parallel Jaw Side Cutters
$54.50
Parallel Jaw Side Cutters
$54.50
1 unit
Parallel Jaw Flat Nose Pliers
Parallel Jaw Flat Nose Pliers
$54.50
Parallel Jaw Flat Nose Pliers
$54.50
1 unit
Square Wrench - Replacement Blades
Square Wrench - Replacement Blades
$15.95
Square Wrench - Replacement Blades
$15.95
2.0mm Square Wrench Blades. 3 per pkg. 1 package
Parallel Jaw Plier Kit
Parallel Jaw Plier Kit
$237.95
Parallel Jaw Plier Kit
$237.95
Contains all six parallel pliers: • Parallel Jaw Round Nose Pliers • Parallel Jaw Flat Nose Pliers • Parallel Jaw Double Nylon Pliers • Parallel...
Digital Vernier Caliper - 100mm
Digital Vernier Caliper - 100mm
$54.50
Digital Vernier Caliper - 100mm
$54.50
Digital read-out makes precise measurements a breeze! 1 unit
6" Knife File - Cut 2
6" Knife File - Cut 2
$53.50
6" Knife File - Cut 2
$53.50
1 file
Replacement Pins for Single and Double Pin Punches
Replacement Pins for Single and Double Pin Punches
$20.95
Replacement Pins for Single and Double Pin Punches
$20.95
1 set
Double Pin Punch
Double Pin Punch
$24.50
Double Pin Punch
$24.50
Useful for pressing out double rivets with industry standard 2.5mm spacing, or for creating holes for them. 1 punch
Small Hole Anvil
Small Hole Anvil
$12.50
Small Hole Anvil
$12.50
Use during rivet extraction. 1 anvil
Leatherette Tool Case
Leatherette Tool Case
$48.50
Leatherette Tool Case
$48.50
Great portability for your tools. 1 unit
Dynamic Stainless Steel Flux
Dynamic Stainless Steel Flux
$12.50
Dynamic Stainless Steel Flux
$12.50
An excellent flux for preparing stainless steel for solder. Works with High Silver content solders only. (See Solder Wire for Titanium.) 1 oz. jar.
Butane Lab Torch
Butane Lab Torch
$84.95
Butane Lab Torch
$84.95
Adjustable flame when you need it. This torch uses butane and ships empty.
Solder Paste with Flux - Yellow 14K Gold
Solder Paste with Flux - Yellow 14K Gold
$108.95
Solder Paste with Flux - Yellow 14K Gold
$108.95
Will adhere wherever applied with bright, clean results and leave little or no carbon residue. Easy to clean up with no waste.
Tap & Drill Bit Assortment
Tap & Drill Bit Assortment
$217.95
Tap & Drill Bit Assortment
$217.95
• Ten drill bits each of the following: 55, 56, 58 and 61. •Three taps each of the following: 1.2, 1.3, 1.4, 1.6, 1.27 and...
Items 151 to 195 of 195 total